上海联迈生物工程有限公司
产品展厅
BL21-CodonPlus (DE3)-RIPL热激感受态细胞
  • 品牌:LMAI Bio
  • 产地:中国/美国/欧洲
  • 货号:LM-1007
  • 发布日期: 2019-03-21
  • 更新日期: 2025-05-07
产品详请
产地 中国/美国/欧洲
品牌 LMAI Bio
货号 LM-1007
保存条件 -80℃
英文名称 BL21-CodonPlus (DE3)-RIPL
CAS编号
保质期 (6个月)

BL21-CodonPlus (DE3)-RIPL热激感受态细胞


BL21-CodonPlus (DE3)-RIPL:                  100μl/支

pUC19 (control vector,10pg/μl):                    10μl

保存条件(保质期):                             -80℃(6个月) 



BL21-CodonPlus (DE3)-RIPL热激感受态细胞基因型

FompT hsdS(rBmBdcm+ TetR gal λ(DE3) endA Hte [argproL CamR] [argileY leuW Strep/SpecR





产品说明

BL21-CodonPlus(DE3)-RIPL菌株来源于Stratagene公司的BL21-Gold菌株,缺少Lon蛋白酶和OmpT蛋白酶,从而减少对重组蛋白的降解,补充大肠杆菌缺乏的4种稀有密码子 (AGA, AUA, CCC, CUA)对应的tRNA (argU, ileY, proL, leuW),提高外源基因,尤其是富含AT-或 GC-的真核基因在原核系统中的表达水平。该菌株染色体整合了λ噬菌体DE3区 (DE3区含有T7噬菌体RNA聚合酶),可同时表达T7 RNA聚合酶和大肠杆菌RNA聚合酶,可用于pET系列、pGEX、pMAL等质粒的蛋白表达,同时具有四环素,氯霉素,链霉素,壮观霉素抗性。BL21- CodonPlus(DE3)-RIPL 感受态细胞由特殊工艺制作,pUC19质粒检测转化效率高达10cfu/μg DNA。


BL21-CodonPlus (DE3)-RIPL热激感受态细胞操作方法

1. BL21-CodonPlus(DE3)-RIPL感受态细胞从-80℃拿出,迅速插入冰中,5分钟后待菌块融化,加入目的DNA(质粒或连接产物)并用手拨打EP管底轻轻混匀(避免用枪吸打),冰中静置25分钟。

2. 42水浴热激45秒,迅速放回冰上并静置2分钟,晃动会降低转化效率。

3. 向离心管中加入700μl不含抗生素的无菌培养基 (2YTLB),混匀后37200rpm复苏60分钟。

4. 5000rpm离心一分钟收菌,留取100μl左右上清轻轻吹打重悬菌块并涂布到含相应抗生素的2YT LB培养基上。

5. 将平板倒置放于37培养箱过夜培养。


Sample Induction Protocol (for reference only)

1.Inoculate a single colony from a freshly streaked plate into 5 ml of LB medium containing the appropriate antibiotic for the plasmid and host strain.

2.Incubate with shaking at 200 rpm at 37℃ overnight.  

3.Inoculate 50 ml of LB medium containing the appropriate antibiotic with 0.5 ml of the overnight culture prepared in step 2(use the 500 ml triangular flask as the container would be better).

4.Incubate with shaking at 150 rpm at 37℃ until the OD 600 reaches 0.5-0.8.

5.(Optional)Pipet 1ml of  the cultures into clean microcentrifuge tubes and  place the tubes on ice until  needed  for gel analysis or storage at  -20℃. These will serve as the non-induced control samples.  

6.Add IPTG to a final concentration of 1 mM.  Optimal time for induction of the target protein may vary from 2-16 hours, depending on the protein.

7.Incubate with shaking at 120 rpm at 37℃ for 3-4 hours. To determine the optimal time for induction of the target protein, it is recommended that a time course experiment be performed varying the induction from 2-16 hours.

8.Place the culture on ice for 10 minutes. Harvest cells by centrifugation at 5,000×g for 10 minutes at 4℃.

9.Remove the supernatant and store the cell pellet at -20℃ (storage at lower temperatures is also acceptable).  

IPTG 

Prepare a 1 M solution of IPTG (Isopropyl-β-D-thiogalactoside; Isopropyl-β-D-thiogalactopyranoside) by dissolving 2.38 g of IPTG in dd water and adjust the final volume to 10 ml. Filter sterilize before use.  


注意事项

1. 感受态细胞*在冰中缓慢融化,插入冰中8分钟内加入目标DNA,不可在冰中放置时间过长,长时间存放会降低转化效率。

2. 混入质粒时应轻柔操作。

3. 转化高浓度的质粒可相应减少最终用于涂板的菌量。

4. 诱导时,IPTG浓度可选(0.1-2mM均可)

5. 为获得需要量的蛋白,*诱导时间,温度,IPTG浓度需实验者优化。



联系方式
手机:13052188602
Q Q:
手机访问官网